Single Color LED Light Bulbs – 40 SMDs
This turn signal bulb provides a direct replacement for factory halogen bulbs. It uses 40 SMD 3030 LEDs for a bright, clean appearance. Choose from white, red, or yellow to match your vehicle and application.
Bright, Reliable LED Lighting
These bulbs deliver a stated 560ml per bulb and provide an output equivalent to 50–55 watts of incandescent lighting. The 40-SMD design offers consistent illumination for exterior vehicle applications. They are a practical upgrade when replacing standard halogen bulbs with modern led lighting.
The single-color design keeps the light output focused on the selected color. White works well for applications requiring clear illumination. Red is suitable for rear lighting applications, including a red brake light setup. Yellow is useful for applications that require an amber-style signal.
Direct Replacement Fit
These bulbs are designed for common 3157, 7443, and 1157 socket applications. Always verify your vehicle's original bulb size before ordering. The bulb measures approximately 0.74 inches wide and 2.18 inches high.
Installation is plug and play when the correct socket is used. Simply remove the factory bulb and install the replacement. No special wiring is required for a standard installation.
Turn Signal Bulb Compatibility
A vehicle's electrical system may react differently after switching from halogen to LED. Some vehicles can experience hyper flash or an error message after installation. A load resistor is recommended when needed to help address these issues.
Before installation, compare the new turn signal bulb with your original bulb for size, socket type, and application. Avoid forcing the bulb into an incompatible socket.
Care and Warranty
Keep the bulb and socket clean during installation. Handle the bulb carefully and make sure it is seated securely. If the bulb does not illuminate, check the socket connection and polarity before further troubleshooting.
Each led bulb is backed by a 1-year warranty. With the correct fitment and proper installation, these single-color bulbs offer a straightforward way to update compatible vehicle lighting.
Specifications:
-
LED Type: SMD 3030
-
LED Quantity: 40 SMDs per bulb
-
Available Colors: White, Red, Yellow
-
Stated Brightness: 560ml/bulb
-
Incandescent Equivalent: 50–55 watts
-
Compatible Sizes: 3157 / 7443 / 1157
-
Width: 0.74 inches
-
Height: 2.18 inches
-
Installation: Plug and play
-
Load Resistor: Recommended when hyper flash or error messages occur
-
Warranty: 1 year
1. What socket sizes do these bulbs fit?
These bulbs are designed for 3157, 7443, and 1157 applications. Confirm your vehicle's original bulb size before purchasing. The turn signal bulb should match the factory socket for proper installation.
2. Are these bulbs plug and play?
Yes. These bulbs are designed for plug-and-play installation when the socket and application are compatible. The turn signal bulb can replace a compatible factory halogen bulb without special wiring.
3. What colors are available?
The bulbs are available in white, red, and yellow. Select the color that matches your intended application. A turn signal bulb should always use a color appropriate for its vehicle lighting function.
4. Will I need a load resistor?
A load resistor may be needed on some vehicles after switching from halogen to LED. It can help address hyper flash or error messages. The turn signal bulb itself does not include a load resistor.
5. What is the difference between these bulbs and standard halogen bulbs?
These bulbs use 40 SMD 3030 LEDs instead of a traditional halogen filament. The turn signal bulb provides a modern LED design while offering a stated incandescent equivalent of 50–55 watts.